|
|
Post by nosuchweb on Aug 25, 2017 8:48:58 GMT
Hi Lawrence,
Great work with opening up this devices possibilities. Has there been a step by step guide made for any of these builds by anyone?
I would appreciate any information you can share to make my own. nosuchweb at yahoo.co.uk
Thank you
|
|
|
|
Post by Jordan on Aug 27, 2017 22:24:01 GMT
Hi Lawrence! Finally I finished this! But after a few tries, I can not solve the problem of initialization delay = /. In addition, everything working perfectly. Has anyone managed to solve this problem? Can you send the code to my e-mail? Jordan.lacerda@gmail.com thanks!   Attachments:
|
|
|
|
Post by Admin on Aug 28, 2017 8:21:48 GMT
Very very nice... the initialization delay is a known issue. What are he dimensions of the box ?
|
|
|
|
Post by signboy on Aug 28, 2017 11:13:46 GMT
What do you mean by "initialization delay"? I had (and dealt with) an issue where it would take somewhere between 3 to 6 button presses for the pedal to finally respond. If this is the same kind of issue, I have a setup routine that will help. It tells the arduino to hold an initializing loop until the pedal is connected before progressing to the loop part of the code.
|
|
|
|
Post by Jordan on Aug 28, 2017 14:54:21 GMT
Very very nice... the initialization delay is a known issue. What are he dimensions of the box ? humm ok ok. The box is a trapezoidal iron enclosure for manufacturing pedal amp controller ... Height greater than 4 cm Smaller height 3 cm Width 6.3 cm Length 39 cm Distance between holes 7 cm cap (6 holes) Distance between side holes 14 cm (3 holes) The aluminum plate covers one of the holes, so the arduino can fit underneath it Sorry for posting on the wrong page, only now that I noticed.  |
|
|
|
Post by Admin on Aug 29, 2017 4:55:00 GMT
Hi Lawrence, Great work with opening up this devices possibilities. Has there been a step by step guide made for any of these builds by anyone? I would appreciate any information you can share to make my own. nosuchweb at yahoo.co.uk Thank you HI, I guess there is no such guide  that I am aware of... Regards, Lawrence (Admin) |
|
|
|
Post by 50g on Sept 4, 2017 4:29:47 GMT
Hi, Thanks.
My ms50g good working.I wish control 70cdr + 50g.Can I control 2 device? I try usb hub,success but first one only working.Can I solve this problem?
Thank you very much.
|
|
|
|
Post by Admin on Sept 4, 2017 8:24:55 GMT
Hi, Thanks. My ms50g good working.I wish control 70cdr + 50g.Can I control 2 device? I try usb hub,success but first one only working.Can I solve this problem? Thank you very much. . Send me the code you are using and I will see if I can check it out... |
|
|
|
Post by 50g on Sept 4, 2017 16:25:55 GMT
The code receive from you.Thanks...At first usb hub not working.So I add 1line.
USB Usb;
USBHub Hub1(&Usb); <<<<<<<< this
USBH_MIDI Midi(&Usb);
now hub is working but forward connected only.Please help me.
I am sorry that I am not good at English.
|
|
|
|
Post by Admin on Sept 5, 2017 7:00:17 GMT
did you download the latest library ?
|
|
|
|
Post by 50g on Sept 5, 2017 11:39:59 GMT
Yes.
|
|
|
|
Post by 50g on Sept 6, 2017 12:31:51 GMT
I solved it! Now 12 effect control.Thank you very much.
|
|
|
|
Post by Admin on Sept 6, 2017 12:33:19 GMT
I solved it! Now 12 effect control.Thank you very much. HOW ? HOW ? I am eager to know... |
|
|
|
Post by 50g on Sept 6, 2017 13:26:19 GMT
Is it okay if I write it here?
|
|
|
|
Post by Admin on Sept 6, 2017 13:54:32 GMT
Is it okay if I write it here? You can if you want to or you can mail it to me at lawrenceadoss@yahoo.com |
|
that I am aware of...